net_ljx000(1) net_ljx000(1)
NAME
net_ljx000 - HP JetAdmin model script
SYNOPSIS
lp [ -o option [ -o option ] ...] <filename>
DESCRIPTION
The model script net_ljx000 is one of the net_lj* model scripts
included in HP JetAdmin distribution. While most options are common
among the net_lj* model scripts, net_ljx000 contains expanded options
specifically for the HP LaserJet 4000, HP LaserJet 5000, HP LaserJet
8000, HP LaserJet 8100 and HP Mopier 320. For example, more values
for the dpi option, more media size options, and a fuser temperature
option.
The model script net_ljx000 will not print the following files: shar
file, executable, archive, library, object, and compressed. Instead,
it prints out a single page, indicating the reason.
OPTIONS
options List all available options for net_ljx000.
auto Auto-switch language (PostScript or PCL) based on file
type. Default.
postscript/post, pcl
Print in PostScript or PCL mode.
hpgl2, hpgl2_p Print in HP-GL/2 landscape or portrait mode.
relay Pass data to the printer without adding any commands.
r/raw Print in raw mode. No CR, LF, or FF processing will be
performed.
dpi<#> Set the resolution to the specified dpi, where <#> is
either 3/300, 6/600, 12/1200/12pro, or 12fast/1200fast.
If <#> is not specified, the printer's front panel sets
the default dpi. The 12pro sets true 1200 dpi with
slow speed at 8ppm. All other dpi settings print
faster at 16ppm speed for LaserJet 4000 and LaserJet
5000, 24ppm speed for LaserJet 8000, 32ppm speed for
LaserJet 8100 and Mopier 320. The 12/1200/12pro is not
supported on the LaserJet 8000, LaserJet 8100, and
Mopier 320.
half/2/2up, quarter/4/4up, 8/8up
Print 2, 4 or 8 pages on one side of paper.
simplex Print single sided. If not specified, the printer's
front panel sets the default to either simplex or
Hewlett-Packard Company - 1 - HP JetAdmin vD.05.xx: July. 1998
net_ljx000(1) net_ljx000(1)
duplex.
vd/duplex/double/d, hd/hduplex, md/mduplex
Print double sided with long-edge binding, short-edge
binding, or manual duplexing. Manual duplexing is
available in HP-UX only for PCL/Text.
legal, letter, A4, A5, B5-JIS, exec/executive
Use the specified media size. These media sizes are
also available: A3, A6, B4-JIS, B6-JIS, custom,
C5/C5env, 8K, 16K, JIS-EXEC, com10/com10env, B5-ISO,
DL/DLenv, PostCard/PostCardD, PostCardS, and monarc.
Media sizes 8K, 16K and JIS-EXEC are available for the
LaserJet 8100, and Mopier 320 only. Media sizes A6,
B6-JIS, and PostCardS are not supported on the LaserJet
8000, LaserJet 8100, and Mopier 320. For PostScript,
11x17 is portrait and ledger is landscape. The media
sizes C5, com10, B5, DL, PostCardD (double), PostCardS
(single) and monarc are envelope sizes.
mtype Use the specified media type, where is either
Plain, Preprinted, Letterhead, Transparency,
Prepunched, Labels, Bond, Recycled, Color, CardStock,
Rough, Vellum, User-defined1, User-defined2, User-
defined3, User-defined4, or User-defined5. User-defined
media types must be pre-configured in the printer. A
default fuser temperature is automatically set for the
specified media type. For Transparency, Rough, and
Vellum, the fuser temperature is set to low, high, and
vellum, respectively. For all other media types, the
fuser temperature is set to normal. The fuser
temperature can be changed explicitly by setting the
fuser option. (LaserJet 8000, LaserJet 8100, and Mopier
320 do not support vellum printing.)
manual/man, tray1, tray2/upper/ub/ubin, tray3/lower/lb/lbin,
tray4, tray5, manualenv/manenv Feed media from the
specified tray. Tray1 is a multi-purpose tray. Tray4
is an optional high capacity tray. Note that media
type and/or size are the preferred way to select media,
except manual feed. The option manualenv/manenv is for
manual feeding of envelopes. The options tray5 and
manualenv/manenv are supported only by the LaserJet
8000, LaserJet 8100, and Mopier 320.
btray1, btray2/bupper/ubb, btray3/blower/lbb, btray4, btray5
Feed media from the specified tray when printing the
banner page. The option btray5 is supported only by the
LaserJet 8000, LaserJet 8100, and Mopier 320.
Hewlett-Packard Company - 2 - HP JetAdmin vD.05.xx: July. 1998
net_ljx000(1) net_ljx000(1)
bin1/topbin, bin2, bin3, ..., bin10
Output pages to specified bin. By default, the bin1
option (face-down) is valid, bin2 is the faceup bin and
bin3 through bin10 are optional external output bins.
The bin3 is the face-up bin if bin2 is not available.
The options bin9, bin10 are supported only by the
LaserJet 8000, LaserJet 8100, and Mopier 320. The bin2
option is valid only when mailbox bin is attached with
printer.
rearbin/leftbin
Output pages to bin2 or rearbin when there is no
mailbox is attached. This command should be given only
when the mailbox is not attached with printer.
fuser Adjust the fuser temperature to print normal,
transparency, rough, or vellum media, where is
normal, low, high/high1, vellum/high2, or high3. Also
specify the media type when adjusting the fuser
temperature. The specification high3 is only available
for the LaserJet 8100, and Mopier 320. The fuser option
is not available for the LaserJet 8000.
econo Turn on or off econo/draft mode, where is on or
off.
srbb<#> Set the starting page number to recover or print the
specified page.
srb<#> Set the beginning page number for a silent run.
sre<#> Set the ending page number for a silent run.
yb/banner, nb/nobanner
Turn the banner page on or off.
color, gray Set the render mode to color or gray.
quality Enhance the resolution, where is light, medium,
or dark. Note that the resolution is not enhanced when
dpi is set to 1200pro.
tondensity
Change the toner density, where is light,
medium, or dark. A medium density produces the best
result, where as a light density saves toner.
topaz Transmit only once to print multiple copies. Note that
using this option turns off banner page printing.
Hewlett-Packard Company - 3 - HP JetAdmin vD.05.xx: July. 1998
net_ljx000(1) net_ljx000(1)
staple Output pages to the staple bin. Use both the staple
and topaz options to print mutiple collated copies to
the staple bin.
collate Turn on or off collate mode where value is on or off.
It produces collated copies (1,2,3.., 1,2,3.., 1,2,3..,
..) if collate is on, otherwise it produces non-
collated copies (1,1,1..,2,2,2..,3,3,3.., ..). This
option is to be given along with the topaz option. This
option alone does not have any effect, but produces
collated copies irrespective of whether collate is on
or off.
proofnhold/pnh
Enable / Disable Proof and Hold printing where mode is
nohold/nhold, printhold/phold, hold, or proof. These
modes indicate how the jobs should be handled. The
option nohold/nhold instructs the printer not to hold
the job in the printer disk. The option printhold/phold
instructs the printer to print the requested copies and
also keep a copy of the job in the printer disk for
later printing (Quick Copying). The option hold
instructs the printer to hold the job, but not print.
The job can then be printed from the control panel. The
option proof instructs the printer to print a copy
(proof) of the job and hold it in the printer disk for
later printing. By default the mode is nhold/nohold.
private <#> Enables private or secured printing of the job. The #
is a 4 digit Personal Identification Number (PIN).
Valid values range between 0000 and 9999. The job can
only be printed from the control panel by entering this
PIN.
HP NETWORK PRINTERS ONLY
debugm/debugm
Send the model script output to a file for examination.
is optional, but it must be an absolute
pathname. If it's not specified, $TMP/ is used.
job/jobnp, nojob, hpnpflog
Bring or not bring up the job monitor for a spool job.
The X-Window display to use is specified by
job+display.
POSTSCRIPT ONLY
a/ascii Print text, without interpreting it.
f Use the specified font, where is a font name
(for example, Courier-Bold). This option is valid only
when ASCII is also specified. HP LaserJet 4000 supports
Hewlett-Packard Company - 4 - HP JetAdmin vD.05.xx: July. 1998
net_ljx000(1) net_ljx000(1)
80 different fonts. Check the PosScript font list
availability in the printer.
ps1 Use PostScript level 1 commands for print formating.
ps2 Use PostScript level 2 commands for print formating.
wmstr Print watermark text. The string will be printed on all
the pages of the document in the background
wmnum<#> Print standard watermark text. The # is a watermark
text number. The valid values are 1 to 15, where 1)
Company Confidential, 2) Company Proprietary, 3)
Company Private, 4) Confidential, 5) Copy, 6) Draft, 7)
File Copy, 8) Final, 9) For Internal Use Only, 10)
Preliminary, 11) Proof, 12) Review Copy, 13) Sample,
14) Top Secret, and 15) Urgent.
PCL ONLY
text 1-up text printing (adding one CR for each LF).
pesc Recognize escape sequence.
3hole Adjust the left/top margin to account for holes (TEXT).
2+ Print 2up in portrait, with header and line numbers.
portrait, landscape
Print in portrait or landscape mode. If this option is
not specified, the printer uses the default mode.
rotate Print in reverse portrait or landscape mode.
ln66 Print 66 lines of text in portrait.
eolwrap Enable end of line wrap.
tl<#> Set the text length of the page.
lm<#>,tm<#>,rm<#>
Set the left, top, and/or right page margin.
rev Print job in reverse order. The rev option is available
for HP-UX only.
c, 10, 12 Set the font pitch to compressed, 10, or 12 characters
per inch.
fp<#> Set the font pitch to <#> characters per inch.
Hewlett-Packard Company - 5 - HP JetAdmin vD.05.xx: July. 1998
net_ljx000(1) net_ljx000(1)
vsi<#>,hsi<#> Set the vertical and/or horizontal spacing increment to
specified number.
ps, fs Use proportional or fixed-spacing font.
lpi<#> Print specified lines per inch, where <#> is 1, 2, 3,
4, 5, 6, 12, 16, 24, or 48.
cs<#> Set the character set to <#>.
type<#> Set the PCL font to the specified number, where <#> is
0 to 999 (check the fonts list availability in the
printer).
height<#> Set the height to the specified number.
style<#>, i/italic, upright, condensed, condensedi
Set the font style to the specified style, where <#> is
either 0, 1, 4, or 5.
weight<#>, m/medium, sb/sbold, b/bold, eb/ebold
Set the font stroke weight to the specified value,
where <#> is either 0, 1, 3, or 4.
n/nroff Print nroff file.
pr Print file in pr mode.
NOTE:
1. AUTO option requires the utility "$HPNPDIR/bin/hpnps". If it
does not exist, print files will be printed in PCL mode.
PostScript files must have a PostScript header (such as %!PS)
inorder to be recognized correctly.
AUTHOR
Hewlett-Packard Company
SEE ALSO
jetadmin(1)
Hewlett-Packard Company - 6 - HP JetAdmin vD.05.xx: July. 1998